← All methods

Automatic transmissions (AT)

The method describes the treatment of automatic transmissions (AT) with "XADO revitalizant gel for automatic transmissions" by introducing the gel into the oil filler neck. The treatment is performed without disassembly; the vehicle is then operated in the normal mode.

Method of treating automatic transmissions (AT) with XADO revitalizant gel

What is treated

When treatment is not performed

Preparation

What is measured before and after

ParameterInstrumentHow and when
fluid level in the AT sumpchecked before the treatment (item 6.3.1); the measuring instrument is not specified in the text of the method

Dosage rates

CompoundRateHow and when
XADO revitalizant gel for automatic transmissionssystem volume 5-8 l — the number of cans in table 6.1 was recognized illegibly (the character "й" appears in the text)treatment scheme — single application
XADO revitalizant gel for automatic transmissionssystem volume 9-12 l — 2 pcs.treatment scheme — single application
XADO revitalizant gel for automatic transmissionssystem volume 13-15 l — 3 pcs.treatment scheme — single application

Treatment stages

  1. Check the fluid level in the AT sump
  2. Shake the can of "XADO revitalizant gel for automatic transmissions"
  3. Dispense the required amount of "XADO revitalizant gel for automatic transmissions" into the oil filler neck (the dipstick opening) of the AT
  4. Operate the vehicle in the normal mode50 h of mechanism operation (1500 km of mileage)

After treatment

Points to watch

Compounds for these units

Source: Instructions for the use of XADO revitalizant gels IE-24.6-25612000-005-2008, pages 14–14.