IE A114ACT UNDER CONTRACT No. 22 DATED 23.11.1999
202VP-12/3 compressor: no teardown, no shutdown — faster charging, cooler air
The compressor built up to operating pressure faster, discharge air heating decreased. 45 s — time to reach the working pressure of 3.2 kgf/cm², 4 min 40 s → 3 min 55 s; 21–25 % — discharge air temperature in both cylinders, 140–160 → 110–120 °C (2000).
with signatures and stampsOJSC Kupiansk Bread Plant and XADO LLC
Key results
| EQUIPMENT | CONDITION AT THE START OF THE TRIAL | WHAT WAS MEASURED |
|---|---|---|
| 202VP-12/3 reciprocating compressor | In service at the plant: pressure of 3.2 kgf/cm² was reached in 4 min 40 s, discharge air at 140–160 °C, elevated oil consumption | Time to reach working pressure, discharge air temperature in both cylinders, oil consumption in the crankcase |
What changed on the compressor after treatment
| PARAMETER | BEFORE TREATMENT | AFTER TREATMENT |
|---|---|---|
| Time to reach 3.2 kgf/cm² | 4 min 40 s | 3 min 55 s |
| Discharge air temperature, both cylinders | 140–160 °C | 110–120 °C, stable |
| Oil consumption in the crankcase | elevated | 3× lower |
The pressure is the same in both measurements — 3.2 kgf/cm²: what is compared is the time the compressor needs to reach it, that is, the capacity of the unit.
Findings of the commission
Current equivalent
Revitalizant gel for compressors and bearings →
Piston, screw and centrifugal compressors; rolling and sliding bearings running in an oil bath; machine-tool spindle units and slideways.
How such units are treated:
About this result:
Limits of this report: The results refer to the 202VP-12/3 reciprocating compressor under the conditions of OJSC Kupiansk Bread Plant; on other units and duty cycles the figures may differ. RVS is an obsolete XADO designation for zero-generation compounds; the current product generation is revitalizants.